In Cisco ASA how to send the firewall traffic to AIP SSM module for inspection?

The traffic we want to be inspected is defined with the use of an access-list. In this example output, the access-list permits all IP traffic from any source to any destination. Therefore, to-be-inspected traffic can be anything that passes through the ASA.

ciscoasa(config)#access-list traffic_for_ips permit ip any any
ciscoasa(config)#class-map ips_class_map
ciscoasa(config-cmap)#match access-list traffic_for_ips

ciscoasa(config)#policy-map global_policy
ciscoasa(config-pmap)#class ips_class_map
ciscoasa(config-pmap-c)#ips inline fail-open
ciscoasa(config-pmap-c)#ips promiscous fail-open